The motorized roller blind is driven by imported tubular motor, by different diameter tube according the real requirement of the building.
I. definition
Motorized Roller Blind is suitable for big and high window frame, or special designed for the leaning window whose angle is above 60 degree. It has a tubular motor to drive the roller tube carrying the fabric rolling to reach the target of light protection. |
|
1. composition:
Driving Part: Tubular motor + electric accessories;
Control Part: cable control, remote control, light control, group control, building central control;
Installation and guiding Part: installation bracket, guiding cord etc.
A. Tubular motor:
Limit stop:As the special motor for roller, the motor should has the liable limit (UP/DOWN) stops which let the motor stop when the roller goes to the right position. Furthermore, the settle-in motor has the function to adjust the middle stop limits very quick.
Operation Protection:The motor has the over-heat protection. Within the normal range, if the motor controller was operated too frequently cause the temperature rise up 130, the protection system would cut off the power suppler to avoid motor burning. The motor would recover to work again after the temperature cool down. |
|
|
2. Control Part
A. Cable control: 2 control archives, up and down;
B. Remote control: normal motor is controlled via radio sender to radio receiver. While the settle-in motor has no special receiver, you could use the sender control the motor directly by matching the code with motor. Meantime, you could reprogram the button to settle the motor.
C. Wind/Light control: Through the wind or light sensor to send the message to the motor;
D. Building intelligent central control: The message is a kind of BAS code goes through the intranet gate, to control the motor. |
|
|
|
