|
|
The new type motorized curtain track is adapt to using in the office, school, bank and hospital, etc. public areas. It is also good for the home furnishing.
Motorized curtain track could be installed onto all kinds of windows. The track itself using quality aluminum, that might be bended to 90 degree in maximum by the smallest radium is 500mm. The track is 14m and bearing 90KG utmost. |
|
The track using belt to convey, and it could make the position accurate as the motor calculating the transmitting by technical methods. Meantime, as the special wide belt conveying process could ensure it usable on the bended track so that the bending track is very smooth.
By 220V/50HZ AC motor, the power is bigger to bear much big carrying. On one of the motor output, there's a series of gears and micro-switches, which makes the motor turns or turns over according to the requirement, so it track could realize the open and close. The limits inside the motor have the function to let the belt stop at any position, that increase the whole system stability and safety.
A over-heat protection has been settled in the motor, when the motor runs to too hot, it would cut off automatically to avoid burning or other damages unnecessary. When the motor cooled down, the system would be resume to work. |
|
Bautex motor has several types for option. When carrying heavy curtain, the motors could be connected in series to realize 2 motors taking 1 curtain. When using bending track, belt touches the track inside which increase the friction. Much bends, much friction, means much bearing should be taken. Hence the big power motor is suggested. Pls check the following technical data: |
|
DATA |
Unit |
30W |
45W |
60W |
80W |
Length |
mm |
207 |
236 |
236 |
264 |
Voltage |
V |
220 |
220 |
220 |
220 |
Frequency |
Hz |
50/60 |
50/60 |
50/60 |
50/60 |
Current |
A |
0.205 |
0.205 |
0.273 |
0.364 |
Speed |
rpm |
1000 |
1000 |
1000 |
1000 |
Torque |
N.cm |
18 |
18 |
23 |
30 |
Time |
min |
10 |
10 |
10 |
10 |
Over-heat Temp |
|
105 |
105 |
105 |
105 |
Over-heat Temp |
M |
14 |
14 |
14 |
14 |
Weight |
Kg |
1.5 |
1.5 |
1.5 |
2.0 |
Output Speed |
rpm |
89 |
89 |
89 |
89 |
Motor Connection Principal |
When motors were connected in parallel, the convey setup would be affected by each other. Hence the special group control unit should be used when the motors were required to be controlled by one switch or radio sender. |
Parts in Detail |
|
|
|
|